One of the most frequent causes of septic issues and in turn, the most prolific catalyst of septic maintenance in Wilmington, NC, is the presence of too many solids within the septic environment. These solids can take the shape of just about anything: from toilet paper that hasn’t broken down, to the dead goldfish that you flushed instead of buried, to the leftover bacon grease that has long since emulsified after finding its way down your drain. And, once they’re in your septic environment, there’s a good chance that these solids aren’t going anywhere—not unless you have your tank specifically pumped and cleaned to eliminate them.
The problems that insoluble solids present can be remedied in three stages: prevention, mitigation and reaction. As these stages might suggest, they basically apply to your situation as you’re aware of it—meaning you can either prevent solids from ending up in your septic environment, mitigate how frequently solids are exposed to your septic environment or deal with a buildup of solids in the right way, as to avoid an even bigger problem. Let’s take a look at each stage of septic maintenance in Wilmington, NC as it applies to insoluble solids:
- Prevention: Simply put, this means not letting anything down your drains that can’t be considered an organic, soluble solid. Basically, the only solids that should be going down into your septic environment are human waste and toilet paper, but as we all know, other items can frequently accompany them. Even something like using your garbage disposal can introduce solids into your septic environment, so be aware of what exactly could be drifting down your plumbing. Prevention is obviously the best way to approach a problem of solids in your septic environment because it truly stops a problem before there is one to consider.
- Mitigation: If you’ve recently had your tank pumped or your septic line inspected and have been warned about the presence of solids in your septic environment, mitigation is your best bet at keeping the balance of things. This essentially means pulling back on your habits of letting things venture into your septic system and taking a more proactive approach to maintaining the balance of your septic tank. It could also mean consulting with your septic contractor about potential septic maintenance in Wilmington, NC, aimed at alleviating some of the burden that excess solids might be causing in the mean time.
- Reaction: If you’ve completely avoided watching what’s going into your septic system and are now facing a serious problem that’s caused by a imbalance weighing heavily in favor of insoluble solids, your only recourse is a prompt and precise reaction to eliminating these solids from your tank. Generally, this means pumping and hydro jetting your system, however if the damage is extensive, you might have to subject your septic environment to other procedures, as outlined by your septic professional.
Regardless of what stage your septic system is at in regards to its ratio of solids to liquids, you should always be mindful of the damage that insoluble solids can wreck on your septic system. Watch what goes down your drains and if something happens to slip by your gaze that will live indefinitely in your septic environment, call a professional immediately to see how you should handle it.